Sun Microsystems X2100 User Manual download pdf (Page 37)

Chapter 2 Software Installation 2-3

2.1.1 Erasing the Primary Boot Hard Disk

If you do not have enough space on the boot partition to install an operating system,

there is an Erase Primary Boot Hard Disk option on the Sun Fire X2100 Server

Supplemental CD main menu, which enables you to erase other installed operating

systems to make room for the new installation.

Caution – Selecting the Erase Primary Boot Hard Disk option from the

Supplemental CD erases all partitions on the hard drive, with the exception of the

diagnostic partition. All user data is lost. Be sure to back up all data on the hard

drive before performing this action.

To erase the primary boot hard disk:

1. Back up all data that you want to save on the hard drive.

2. Insert the Supplemental CD into the server’s DVD drive.

3. When the main menu appears, select the following option from the Supplemental

CD main menu:

3. Erase Primary Boot Hard Disk

This option erases all partitions currently located on the primary hard drive, except

for the diagnostic partition. If the diagnostic partition is present, it remains

untouched.

2.1.2 Setting up the BIOS for Operating System

Installation

If you plan to install an operating system onto the Sun Fire X2100 Server, you need

to make sure that the BIOS is set up correctly before you install the software. See the

procedure that matches the operating system you plan to install.

2.1.2.1 Setting up the BIOS for Windows 2003 or Solaris 10 OS

The default for the Installed O/S option is Others. If the default has not been

changed, you do not need to perform this setup for the Windows 2003 or Solaris 10

operating systems.

If the BIOS Installed O/S option has been changed from the default, do the

following for Windows 2003 or Solaris 10 operating system:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 77 78

No comments

Sun Microsystems X2100 User Manual Page 37