Sun Microsystems X2100 User Manual download pdf (Page 18)

1-8 Sun Fire X2100 Server Getting Started Guide • April 2006

4. From the front of the rack, set the proper width of the rails with spacer. (See

FIGURE 1-5.)

FIGURE 1-5 Setting the Rail Width

5. Tighten the screws on the brackets.

6. Remove the spacer and confirm that the rails are attached tightly to the rack.

7. Repeat Step 4 through Step 6 for rear of the rack.

8. If available, extend the anti-tip foot at the bottom of the rack. (See FIGURE 1-6.)

Caution – If your rack does not have an anti-tip foot, there is some danger of the

rack tipping.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 77 78

No comments

Sun Microsystems X2100 User Manual Page 18