Sun Microsystems X2100 User Manual download pdf (Page 28)

1-18 Sun Fire X2100 Server Getting Started Guide • April 2006

Note – Keyboard, mouse and video are optional with an operating system that

supports headless operation.

4. Connect a terminal to the serial port.

Note – The preinstall image is directed by default to the serial port (ttya) and

nothing will show up on the monitor until the installation is completed an the

system is reconfigured to allow video to the video port. See

Section 1.8, “Using Serial

Console Redirection” on page 1-22 for instructions on setting up serial console

redirection and redirecting video back to the onboard video display, if needed.

5. Connect Ethernet cables to the server’s gigabit Ethernet connectors.

See Section 1.5.1, “Interconnecting Servers” on page 1-19 for information on how to

interconnect servers and connect them to a LAN.

6. Connect any additional external devices to the server’s other connectors.

FIGURE 1-14FIGURE 1-14 depicts the back panel of the Sun Fire X2100 Server.

FIGURE 1-14 Back Panel

TABLE 1-1 Back Panel

Label Connector/Slot Label Connector/Slot

1 Power connector 6 Onboard HD15 video connector

2 Locate LED 7 Ethernet connectors (2)

3 Service indicator LED 8 PCI EXPRESS x16 graphics slot

4 Power LED 9 USB connectors (4)

5 Serial connector

SERIAL

8734 5 6

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 77 78

No comments

Sun Microsystems X2100 User Manual Page 28