Sun Microsystems CP3220 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 135
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
1-10 Sun Netra CP3220 Blade Server User’s Guide January 2010
FIGURE 1-6 Sun Netra CP3220 Blade Server, Backplane, and Relationship to ARTM
Note When using the Sun Netra CP32x0 ARTM with the Sun Netra CP3220 blade
server, use shielded cables of less than 10 meters in length for serial I/O ports.
Caution You must use shielded cables for all ports to satisfy EMI compliance
standards.
You can order the CP32x0 ARTM, build a custom module, or buy one from an IHV.
You must set up a minimal set of I/O for a boot path for the host board and for a
path for console I/O to deliver commands and read board and system status.
Possible boot and console configurations are described in
TABLE 1-1. Sun
Microsystems provides the Sun Netra CP3220 blade server and optionally, a
compatible Sun Netra CP32x0 ARTM. This module provides one
Sun Netra CP3220 blade server
Sun Netra CP32x0 ARTM
(installed from the rear)
ATCA backplane
(installed from the front)
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 134 135

Comments to this Manuals

No comments