Sun-microsystems 6900 User Manual download pdf (Page 145)

Chapter 9 Troubleshooting Virtualization Engine Devices 125

Sun Proprietary/Confidential: Internal Use Only

▼

To Reset the SAN Database on a Single Virtualization

Engine

1. To disconnect the virtualization engine’s device-side FC cables, type:

2. Open a Telnet session to the virtualization engine specified in Step 1.

3. Enter the password.

The User Service Utility Menu is displayed.

4. Type 9 to clear the SAN database.

■ A successful command displays the message

SAN database has been cleared!

■ An unsuccessful command results in the service code 051.

If this occurs, repeat Steps 1 through 3.

■ If the command continues to fail, replace the virtualization engine.

5. To reconnect the virtualization engine’s device-side FC cables, type:

6. Type B to reboot the virtualization engine.

# setveport -v virtualization-engine-name -d

# setveport -v virtualization-engine-name -c

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 203 204

No comments

Sun-microsystems 6900 User Manual Page 145